Log Boss

The Ultimate in Log & Timber Fasteners
If you want a fastener with maximum holding power, superior strength and extra pull-down, then you want Log Boss, specifically designed for the construction of log and timber structures.
  

Three inches of large diameter, aggressive thread provides the grip necessary for pulling even the most difficult logs into place while the flatter flange on head increases the holding power. A lubricant coating and relief wings reduce driving forces required to make installation as easy as possible.

Log Boss Fasteners are available in lengths of 6", 8", 10", 12", 14" & 16" and are packaged 250 per container. One T-40 driver bit is supplied with every container.

Features and Statistics

Panel Boss

First Roofing Fastener for the Log Home Industry 

The totally new Panel Boss fastener is designed with the same wood holding tenacity of the Log Boss fastener. The coarse threads and the different pitch angle dig into the wood to provide maximum pull-down action without worry of “spin out” during proper installation.

The Panel Boss also has a flat-head design. It does not interfere with the installation of shingles or metal roofing. The driver socket is a #30 Torx drive and there is one driver packed with every pail of fasteners.

Panel Boss fasteners are stocked in 7.5" length. Additional sizes will be offered as needs are determined. There are 500 fasteners per pail.